Home  Products & Services  About Us  Capabilities  Contact Us

Order Here  Shipping Methods  Contents  Feedback

    

 

Models:  KA1500A & KA1500B    [Tool Kits]                

ST*II Compatible Anaerobic/Epoxy Termination Kit                                   

 

P/N KA1500A comes w/Metal ST*/SC/FC puck        P/N KA1500B comes w/Tungsten Carbide ST*/SC/FC puck

 

[Click here for Consumables]

 

Kit contains the following:

  1. Anaerobic Adhesive (10) (Loctite RC680) & MSDS

  2. Anaerobic Primer (Loctite 7649) & MSDS

  3. Disposable needle tips

  4. Safety glasses

  5. Plastic water bottle

  6. Kim Wipes Lint Free Wipes

  7. Crimp tool Sargent 2165 CT

  8. Jacket stripper

  9. Kevlar shears

  10. No Nik buffer stripping tool

  11. Cleaving tool

  12. 100X Microscope w/ST* Adapter**

  13. 100X Microscope w/SC-FC Adapter

  14. Acrylic polishing plate w/rubber feet

  15. 3" x 8" Lapping Film:  50 sheets each

    bullet

    15um (silicon carbide)
    bullet

    5um (silicon carbide)
    bullet

    1um (alumina oxide)
    bullet

    .3um (alumina oxide)

  16. Carrying Case

  17. Safety tips

  18. Installer tips

  19. Instruction sheets

  20. Thank you letter

  21. Epoxies and Syringes, & Oven (additional cost) if required

 

** Pine Valley recommends a special 2 view 100X microscope. The second view is angled allowing the installer to view the spherical radius, the area glued around the fiber, the clad surface and the fiber core surface. This angled view will also allow you to determine if pistoning is present.

 

Pine Valley recommends blow off after each polish with canned air.

 

 

*ST is a registered trademark of AT&T

 

 

    

 

[Home]

 Fiber Optic Links
 [Fiber Optics] [Fiber Optic Products] [Connectors] [Connector Index]
[ST Connectors] [SC Connectors] [FC Connectors] [LC Connectors]
[Connector Assembly Instructions] [Fiber Optic Glossary]
 Semiconductor links:

[Semiconductor Tooling] [Ejector Probes]

[Die Collets] [Vacuum Pick-up Tools]
   
       Best when viewed with screen resolution set at 1024x768.
                                                                                          

       2008 Pine Valley Precision, Inc.
       Last modified: 02/27/08