Home  Products & Services  About Us  Capabilities  Contact Us

Order Here  Shipping Methods  Contents  Feedback

    

 

Models: KA1801A & KA1801B    [Tool Kits]

LC/MU Compatible Anaerobic/Epoxy Termination Kit

 

P/N KA1801A comes w/Metal LC/MU puck             P/N KA1801B comes w/Tungsten Carbide LC/MU Puck

 

[Click here for Consumables]

 

Kit contains the following:

  1. Anaerobic Adhesive (10) (Loctite RC680) & MSDS

  2. Anaerobic Primer (Loctite 7649) & MSDS

  3. Disposable needle tips (10)

  4. Safety glasses

  5. Plastic water bottle

  6. Kim Wipes Lint Free Wipes

  7. LC/MU Crimp tool

  8. Jacket stripper

  9. Kevlar shears

  10. No Nik buffer stripping tool

  11. Cleaving tool

  12. 100X microscope with LC/MU Adapter

  13. Acrylic polishing plate w/rubber feet

  14. 3" x 8" Lapping Film: 50 sheets each
    bullet

    15um (silicon carbide)
    bullet

    5um (silicon carbide)
    bullet

    1um (alumina oxide)
    bullet

    .3um (alumina oxide)

  15. Carrying Case

  16. Safety Tips

  17. Installer tips

  18. Instruction sheets

  19. Thank you letter

  20. Epoxies, Syringes, Oven, & Interferometer with LC/MU mount (additional cost) if required

 

Pine Valley recommends blow off after each polish with canned air.

 

 

    

 

[Home]

 Fiber Optic Links
 [Fiber Optics] [Fiber Optic Products] [Connectors] [Connector Index]
[ST Connectors] [SC Connectors] [FC Connectors] [LC Connectors]
[Connector Assembly Instructions] [Fiber Optic Glossary]
 Semiconductor links:

[Semiconductor Tooling] [Ejector Probes]

[Die Collets] [Vacuum Pick-up Tools]
   
       Best when viewed with screen resolution set at 1024x768.
                                                                                          

       2008 Pine Valley Precision, Inc.
       Last modified: 02/27/08