D  -  Delrin       

    T  -  Torlon

    C  -  Carbon

    V  -  Vespel

    C2  -  Tungsten Carbide

    SS  -  Stainless Steel

    BD  -  Black Delrin

    TF  -  Teflon

    Notes:

    1. Style 2 tools will be supplied when tip diameter (T) is larger than .125".

    2. Tip diameter (T) must be at least .006" larger than hole diameter (H).

    3. Tools are normally supplied .437" long, unless otherwise specified.

    4. Tool material is normally Delrin.  Tungsten carbide shank tools with Delrin tips are

        also available upon request.

    5. Tolerance on hole size (H) of .041" and larger is +/-.002".

    6. Tools with bottleneck tip, although not shown, are also available. Consult factory

        for details.

Standard Pick-up Tools        (Pine Valley can also customize parts to your needs.)