Home  Products & Services  About Us  Capabilities  Contact Us

Order Here  Shipping Methods  Contents  Feedback

    

 

Model 3648:  Styles 1 & 2    [Die Collets]

Tolerances:  

Unless otherwise specified, tolerances are as follows and

dimensions are in inches.

Decimals = ±.0005" / Fractions = ± 1/64" / Angles = ± 1° 0'

 

[Die Pocket Angle Detail]

[Tip Detail]

 

Ordering Information: 

See notes.

 

Tip Material:                                                 

C2 - Fine grain Tungsten Carbide

 

Example: 

    1       2      3       4        5        6

3648 - 90 - C2 - .020 -.020 - .005

 

1. Model   

2. Die Pocket Angle (90o Standard or 120o)   

3. Tip Material   

4. Die Width (W)             

5. Die Length (L)   

6. Die Thickness (T)

 

Notes:                                                                                                                           

1. This tool is designed for optimum die viewing and maximum vacuum pick-up as required on

    Foton 8030 and Elmont die bonders.

2. Vertical facets in lieu of standard 15o angle facets are optional. When specifying vertical facets,

    facet length must also be specified.

3. Vertical corner reliefs, which allow the die corners to extend beyond the die pocket, are also

    available but must be specified.

 

 

    

 

[Home]

 Fiber Optic Links
 [Fiber Optics] [Fiber Optic Products] [Connectors] [Connector Index]
[ST Connectors] [SC Connectors] [FC Connectors] [LC Connectors]
[Connector Assembly Instructions] [Fiber Optic Glossary]
 Semiconductor links:

[Semiconductor Tooling] [Ejector Probes]

[Die Collets] [Vacuum Pick-up Tools]
   
       Best when viewed with screen resolution set at 1024x768.
                                                                                          

       2008 Pine Valley Precision, Inc.
       Last modified: 02/27/08