Model 6007 Die Collet

Model 6007: Styles 1 & 2 [Die Collets]

Tolerances:

Unless otherwise specified, tolerances are as follows and dimensions are in inches.

Decimals = ±.0005" / Fractions = ± 1/64" / Angles = ± 1° 0'

Ordering Information:

See notes.

Tip Material:

C2 - Fine grain Tungsten Carbide

Example:

1 2 3 4 5 6 7

6007 - 90 - C2 - .020 -.020 - .005 - .437

1. Model

2. Die Pocket Angle (90^oStandard or 120^o)

3. Tip Material

4. Die Width (W)

5. Die Length (L)

6. Die Thickness (T)

7. Tool Length (when required) (see note 6)

Notes:

1. Pine Valley's unique tapered internal shape provides for maximum vacuum pick-up.

[Super fine grain material pressed and manufactured in house.]

2. Consult the factory for die size capabilities of individual shank styles.

3. For open-ended die collets with comparable shank styles see Series 6500.

4. Vertical facets in lieu of standard 15° angle facets are optional. When specifying vertical facets,

facet length must also be specified.

5. Vertical corner reliefs, which allow the die corners to extend beyond the die pocket, are also

available but must be specified.

6. All tools will be supplied at the standard length shown on the drawing, unless otherwise specified.

Fiber Optic Links

Semiconductor links:

[Semiconductor Tooling] [Ejector Probes]

Model 6007: Styles 1 & 2 [Die Collets]