Unless otherwise specified, tolerances are as follows and dimensions are in inches.

Decimals = ±.0005" / Fractions = ± 1/64" / Angles = ± 1° 0'

[Die Pocket Angle Detail]

[Tip Detail]

See notes.

C2 - Fine grain Tungsten Carbide

6010 - 90 - C2 - .020 -.020 - .005 - .437

1. Model

2. Die Pocket Angle (90^o Standard or 120^o)

3. Tip Material

4. Die Width (W)

5. Die Length (L)

6. Die Thickness (T)

7. Tool Length (when required) (see note 6)

Notes: 

1. Pine Valley's unique tapered internal shape provides for maximum vacuum pick-up.

   [Super fine grain material pressed and manufactured in house.]

2. Consult the factory for die size capabilities of individual shank styles.

3. For open-ended die collets with comparable shank styles see Series 6500.

4. Vertical facets in lieu of standard 15^° angle facets are optional. When specifying vertical facets,

    facet length must also be specified.

5. Vertical corner reliefs, which allow the die corners to extend beyond the die pocket, are also

    available but must be specified.

6. All tools will be supplied at the standard length shown on the drawing, unless otherwise specified.