Custom Probes can be made per customer's
specifications. Please call with specifications at 856-663-1855, send by
fax at 856-663-8472 or by e-mail at
tooling@pinevalleyprecision.com
for quotation.
Pine Valley's standard probes can
be used with the following machines:
6600-1: Foton Bonding Machines
6600-2: AMI and Datacon Bonding
Machines
6600-3: Essex and Special Bonding
Machines
Pine Valley can also supply
probes with a Full Radius Tip. Please contact us with specifications for
quotation.
Model 6600 (Pine
Valley's Standard Ejector Probes)
   Ordering Information:
(For use when
specifying tools which
are not shown in standard parts table -
see note 1)
Material:
Fine
Grain Tungsten Carbide
Example:
1 2
3 4
5
6600 -
.046 - .562 - .0009 - 15º
1. Model
2. Tool Diameter (D)
3. Tool Length (L)
4. Tip Radius (R)
5. Tip Angle (A)
Notes:
1.
Probes with dimensional modifications may be specified as shown in the
ordering
information.
2.
Tolerances, if other than those shown on drawing, shall also be specified.
Standard Ejector Probes
(Pine
Valley can also customize parts to your needs.)
|
Model # |
Tool Dia. (D) |
Tool Length (L) |
Tip Radius (R) |
Tip Angle (A) |
|
6600-1 |
.0275" |
.669" |
.0005" |
15° |
|
6600-2 |
.0276" |
.562" |
.0006" |
12.5° |
|
6600-3 |
.0276" |
.709" |
.0008" |
10° |
| 
Ejector Probes
[
